SMOK Alien 220W review

SMOK Alien 220W

The SMOK Alien 220W is designed for intermediate vapers who are looking for an all-in-one high power set up. The device offers up to 220 Watts of power and has both Variable Wattage and Temperature Control functionality. In addition the kit includes the TFV8 Baby Beast Sub Ohm tank.

DRAGON Alien 220W features

  • Zinc Alloy Construction with Spray Painted Finish
  • OLED Display
  • Stainless Steel 510 Connector
  • Spring-Loaded Brass 510 Pin
  • Size: 85x44x28.4mm
  • Power Range: Max. 220W
  • Resistance Range: 0.1ohm-3.0ohm (Variable Wattage) / 0.06ohm-2.0ohm (Temperature Control)
  • Temperature Range: 200-600°F / 100°-350°C

TFV8 Baby Beast Sub Ohm Tank features

  • 3ml Capacity
  • Top Filling Design
  • Dual Adjustable Airflow Slots
  • Stainless Steel and Glass Construction
  • 22mm Diameter

What’s in the box?

  • 1 x Alien 220W Box Mod
  • 1 x TFV8 Baby Beast Tank
  • 1 x V8 Baby-Q2 Core 0.4ohm dual coil (Pre-installed)
  • 1 x V8 Baby-T8 Core 0.15ohm Octuple coil
  • 1 x Micro USB Cable
  • 1 x Replacement Glass Tube
  • 1 x User Manual
  • 1x Pack of Spares

SMOK Alien 220W styling and build quality

One thing that is really noticeable about the SMOK Alien is its excellent form factor which is surprisingly compact for a dual 18650 device. Everything is nicely rounded and this makes for a very comfortable feel when held in the hand. The shell of the device is made from Zinc Alloy that is then spray painted. The finish is actually rather nice and is stylised by coloured accents, orange in the case of the item sent for review but other colours are available. One side of the device sports a smart carbon fibre style pattern.

The device features three buttons, firstly a squeeze trigger fire button which initially does take a little getting used to and two smaller adjustment buttons located beneath the display. The two adjustment buttons are a little on the small side but they are thankfully rattle free.

The display conveys a lot of information, perhaps a little too much. All of the typical information you can expect is shown but due to the way it is presented it tends to look a little too compacted and cluttered. One slight issue is that the display is not the brightest that I have come across and it can feel a little awkward to read.

The device’s 510 pin is spring-loaded and I had no issues getting my atomizers to sit flush. The 510 connector appears to be made from Stainless Steel and has decent threading.

The SMOK Alien 220W requires two 18650 batteries which are not included. The battery compartment itself features a press and slide lid that is easy to use. The correct battery orientation is clearly marked on the interior and the flip lid battery compartment means that the batteries are really easy to insert and remove.

There is a Micro USB Port on the device that is located directly beneath the two adjustment buttons. It does look a little strange since it is angled at about forty five degrees. You can use the included cable to connect the device to your PC to charge the batteries or simply use an external battery charger. The cable also allows you to download firmware upgrades from SMOK. Weirdly enough the compartment has no major venting apart from a single Micro USB Port shaped hole in the lid. I certainly did not notice any over-heating issues at low Wattage but I did wonder how well it would cope at extreme Wattages so please be mindful and use the best batteries you can get.

Focus On www.urvapin.com For More Vape Start Kit.

SMOK TFV8 Baby Beast Sub Ohm Tank

Included in the box along with the mod is the TFV8 Tank. It has dual adjustable airflow, top filling and a 3ml capacity. Two coils are included, one of which is pre-installed for you. The overall construction of the tank is decent and even though it tends to primarily cater to cloud chasing fans it is a nice extra to have.

Ease of use

The SMOK Alien uses the same style of menu that you will no doubt already be familiar with. It certainly is straightforward enough to get to grips with and the included manual does a thorough job of explaining all of the device’s functions.

While all of the information that you might require is displayed the particular font used and the compactness of the lettering tends to make everything look rather cluttered to read and this isn’t helped by the display which is not particularly bright. Fortunately it is the only thing that I feel lets down this product a little but considering the reasonable enough price of the product you could certainly live with it.

SMOK Alien 220W performance

I am happy to report that I encountered no problems at all when using the SMOK Alien 220W and it performed equally well whether I ran it in Variable Wattage or Temperature Control Mode. The fire button was very responsive and the option is there to adjust for a soft or hard initial ramp up. Temperature Control Mode had no apparent issues and I noticed no heat spiking or Resistance fluctuation. The Temperature Co-Efficient can be adjusted if you wish and the default settings include support for Nickel, Titanium and Stainless Steel wire types.

Battery life was pretty typical of a dual 18650 device and I got almost two days of full use out of it when vaping heavily at low wattage. If you vape at 220W you can expect that battery life to drain extremely fast and I would suggest you only ever try this with 30A rated high quality batteries.

The only thing that I didn’t like about this device when using it is the main screen that I have already mentioned which ideally could be much brighter and better spaced out but providing you aren’t constantly adjusting your settings it is less of an issue. Overall the device worked well and I think that if you bought one you would be very happy with it!

I also tried out the SMOK Micro TFV8 Baby Beast tank included in the box using some Element E-Liquids Apple Acai and I found it made for an enjoyable enough vape. Flavour was pretty decent and the small tank will certainly please cloud chasers considering its generous vapour production. A 3ml juice capacity is fairly reasonable and the top filling system worked well.

I should mention that according to some reports I have read online the first production run of the SMOK Alien 220W had some issues with the fire button responsiveness that was rectified in subsequent runs but I found no such problem with the device that I received for review.

Conclusion

In my opinion the SMOK Alien 220W is a very well built and decent mod that has a really nice form factor considering it takes two 18650 batteries. In terms of performance it works well and I think most people would be very happy with it and I feel that is a very good offering from SMOK.

While it is very similar to other high powered devices out there in terms of operation I do think that if you ideally need something with ease of use in mind and excellent readability then it is certainly worth paying more for the new SMOK G-Priv but if that is not an issue for you then the SMOK Alien 220W will certainly serve you well and the bonus is that it also includes a tank! At the end of the day the decision is yours to make.

Now It’s Available :

Smok Alien 220W TC Kit with TFV8 Baby Tank

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

SMOK OSUB 80W Baby Kit review

SMOK OSUB 80W Baby Kit

New from SMOK is the OSUB 80W Baby Kit. This product is essentially a slimmed down version of their OSUB Plus Kit. Unlike the OSUB Plus, the Baby does not feature an internal battery and instead requires a single 18650. The device offers up to 80 Watts of power in either Variable Wattage or Temperature Control Modes and has support for all major wire types.

Also included is the TFV8 Baby Tank which this makes this a very attractive starter package for a new vaper. So let’s take a closer look and see exactly what it has to offer you!

OSUB 80W Baby Kit Mod features

  • Zinc Alloy Construction
  • Dimensions: 83 x 37 x 22 mm
  • Weight: 130g
  • Variable Wattage Mode
  • Temperature Control Mode
  • TCR Adjustment
  • Puff Counter
  • Supported Temperature Control Mode Wire Types: Stainless Steel, Nickel and Titanium
  • Requires 1x 18650 Battery (Not Included)
  • Wattage Range: 1–80W
  • Voltage Range: 0.8–9.0V
  • Resistance Range: 0.1– 3.0ohm (Variable Wattage Mode) | 0.06–3.0ohm (TC mode)
  • Temperature Range: 200–600°F / 100–315°C
  • 0.96 inch OLED Screen
  • Spring-Loaded 510 Pin

TFV8 Baby Tank features

  • Stainless Steel, Pyrex Glass and Delrin Construction
  • Diameter: 22mm
  • Height: 53mm
  • Weight: 47g
  • Capacity: 2ml (EU Edition)
  • 510 Threaded
  • Top Filling Hinged Top Design
  • Adjustable Airflow

What’s in the box?

  • 1x OSUB 80W Baby Mod
  • 1 x TFV8 Baby Tank
  • 2 x V8 Baby Q2 0.4ohm Dual Core Coils
  • Micro USB Cable
  • User Manual
  • Warranty Card
  • 2 x vape bands
  • Spare O-rings
  • Spare Juice Inlet

In my opinion this starter kit does come with a decent amount of spares, but ideally I think it would have been nice if SMOK had included spare glass for the tank.

OSUB 80W Baby Kit styling and build quality

What is especially nice about this device is its slim line and ergonomic design. The device feels really comfortable in the hand and thanks to the excellent Zinc Alloy construction it is quite lightweight. The device is available in a variety of colours and has a matte painted and finger print resistant finish.

The 510 connector appears to be made from Stainless Steel and the spring-loaded 510 pin looked to be made from Brass. I had no problems getting any of my atomizers to sit flush but keep in mind if you use anything larger than 22mm diameter it will overhang. Given that the device itself is quite thin it is probably best not to pair it with larger tanks since this could cause it to topple over if knocked.

Just like other SMOK devices the fire button is actually a squeezable trigger bar. Now for the record I have never been a fan of some of these trigger bar mods because on occasion they have been very stiff or tend to stick, but in my opinion SMOK have got this one just right and it feels very responsive when firing. The two adjustment buttons are of a decent enough size and sensibly located with thankfully no noticeable rattle. The Micro USB Port is located on the side of the device directly below the adjustment buttons.

The OLED display is bright and clear with all of the typical information clearly shown including Resistance, Wattage, Temperature, Battery life etc. The battery compartment is accessed via a small latch in the base of the device and the battery needs to be inserted positive side up. The latch seemed to work well and kept the compartment secure and in the time I used never accidentally opened. There is no obvious venting on this device but I would assume it gets some ventilation from the groove around the latch itself.

Focus On www.ave40.com For More Vape Kits.   

TFV8 Baby Beast Tank

The included tank is nicely put together and is mainly constructed from Stainless Steel. The tube is made from Pyrex Glass and the juice insert is made from Silicone rubber. The included drip tip is made of Delrin which will minimise the amount of heat that reaches your lips.

The capacity of the Tank is variable depending on where in the world you live. Basically it’s supposed to me 3ml but thanks to the TPD we are stuck with 2ml maximum. Fortunately it isn’t that big a deal since the tank does feature the TFV trademark swing top hinged lid so refilling is quickly accomplished.

There are two airflow slots and the airflow is fully adjustable. At its most open it caters to a direct lung inhale and is a very airy vape. By adjusting the airflow you can reduce that to a slightly restricted lung inhale but I don’t feel it’s suitable at all for mouth to lung users.

Ease of use

One thing you really notice about this device is that it primarily caters to left-handers. Now while you can flip the screen orientation I did find it looks a little odd to me as a right-handed user. This also extends to the adjustment buttons since what I would typically assume was the minus button was in fact the “Wattage Up” button. Of course this is something you will quickly get used to with continual use but it did feel a little weird to me.

  • The Wattage is adjusted in .1 or 1.0 Watt increments. In Temperature Control Mode Celsius is adjustable in 5°C increments and in Fahrenheit in 10°F increments. You can round-robin between Celsius and Fahrenheit in TC mode.
  • Three clicks takes brings up the menu which offers a dizzying array of options: Mode, Puff Counter, Adjust Ohm, TCR, Setting, and Power.
  • Under the Mode function you can toggle between Variable Wattage and Temperature Control Mode with a choice of five different draw strengths and three different supported wire types (Ni200, Titanium, and Stainless Steel).
  • The Puff menu displays your total number of inhales but be aware it does have a limiting function so be sure to switch that off if you are a chain vaper like myself. You can reset the counter at any time.
  • Adjust Ohm allows you to alter resistance of your coil to three decimal places.
  • The TCR mode allows you to adjust the resistance of the current wire type.
  • Other settings allow you to switch on Stealth Mode, change screen contrast, flip orientation and change the screen time out interval.
  • To switch off the device select the power option in the menu or click the trigger bar five times to lock the device and then hold down the trigger for five seconds.
  • When fitting a new atomizer the device will detect it and ask you to confirm if this is a new coil or not before you can vape.

Performance

When the original TFV tanks came on to the market I was certainly very impressed by their extreme cloud production, but not by the required power, juice consumption and also the flavour which I found a bit washed out. The new TFV8 Baby Beast Tank included in this kit is rather different and while it does put out very excessive cloud production (which will delight some users and I actually liked it too), the flavour is actually surprisingly nice being both crisp and clean. Juice consumption for a 2ml TPD compliant tank is something of a potential problem since when vaping the pre-installed 0.4ohm coil anywhere between 40-80W, but given how easy the tank is to fill I didn’t find it that much of a bother. I personally found 45W offered a very enjoyable vape and given that the flavour was really nice I saw no need to put any additional drain on the battery by upping the Wattage.

Sadly both included Q2 Core Coils are 0.4ohm Resistance which as you might expect does put something of a drain on the battery if you are chain vaping. Ideally it would be worth picking up some of the Q2 Core 0.6ohm Coils if you don’t want to drain the battery as fast since they are rated for 20-50W. However as starter kit tanks go I found this one to be very enjoyable!

Of course if battery drain is a serious concern this device would pair up really nicely with an Aspire Nautilus 2 or a decent RTA. I happily used my fairly compact Squape R[s] since the Kayfun 5 was a bit top heavy when fitted.

I had no problems at all when using this device in Variable Wattage Mode and it also worked extremely well when using Temperature Control Mode with my Squape R[s] fitted with a Stainless Steel coil. With all single 18650 battery devices battery drain is always going to be an issue and if you vape often you are unlikely to get through the entire day before swapping one out but then again a spare battery is easy enough to carry around with you.

Conclusion

In my opinion this is a really good and well performing starter kit from SMOK, which is smartly designed and form friendly but do keep in mind the included tank does cater more to the cloud chasing fans. Regardless the tank can easily be replaced with another from your collection.

The only noticeable oddity about this device is that it does tend to feel like it was mainly designed for left-handed users but if you find one at the right price this is still a really good device that is well worth considering.

Now It’s Available :

SMOK OSUB 80W Kit With TFV8 Baby

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

SMOK STICK X8 REVIEW

In-depth SMOK Stick X8 Review

SMOK is back at it again, with yet another new entry in its already impressive line of great vaping products. This time, the company has brought us a new vape pen that it’s calling the Stick X8. It sells for less than $40 for the kit, which will probably spark a great deal of interest from new and intermediate-level vaping fans, especially for those who are looking for the best e-cigarette to quit smoking with. But what do you get for that moderately-low price? Is the Stick X8 worthy of bearing the SMOK name? And why do certain members of our test team get so excited whenever they hear about a new vape pen offering, anyway? We’ll try to answer the first two questions in this SMOK Stick X8 review. That last question is one that’s better left to the psychologists…

Let’s jump right into this, shall we?

Colors available of the Smok Stick X8

Smok and the Power!

First, let’s stipulate something right out of the gate: we love SMOK. It’s a great company with a great reputation for providing vapers with high-quality, reliable products. Yes, they’ve focused a bit more than we’d like on subtle aesthetic changes in recent months, but that doesn’t mean that they’ve lost a step at all. They’re still one of the most innovative companies out there. So, you can imagine that we had high hopes for the X8, and fully expected it to knock our socks off.

The pen has a powerful 3000mAh battery. You heard that right: 3000mAh.

Impressed yet? You should be. In our tests, this battery provided us with all the power we needed to draw out some really impressive vapor clouds – and its charge lasted for far longer than we might have assumed if we were unfamiliar with that battery’s capabilities. Suffice it to say that SMOK made the right decision on the power front and we have no option to vote it as one of the best vape pens on the market. There are only a few things more annoying than a weak vape pen that spits out negligible spurts of vapor. This isn’t the case with this model though, thank goodness!

Focus On www.ave40.com For More Vape Kits.   

The Kit

The Smok Stick X8 KitThe pen comes in a kit, which is always handy to new vapers. After all, who wants to buy a product only to find out that they need three or four other products before they can actually use that first purchase? The kit comes in six different color options and includes a beautiful presentation box decorated in a volcano theme. It includes that powerful battery we mentioned, as well as the X-Baby tank, pre-fitted .25 Ohm coil and a spare coil rated at .13 Ohms. You also get other spare parts, charging cable, manual, and a handy vape band. Not bad at all.

The design is all SMOK sleekness, with a cutting-edge look that puts it a rung above its rivals in the marketplace. It’s 85 mm long, and easy to use. That’s because it has a single button to operate its vaping functions – a common enough design for vape pens. There’s the obligatory LED light as well, to let you know when you need to give it a recharge.

Be sure to read our vape deals this pen and others like it are often on sale!

 

Performance

It’s a vape pen, so you’re obviously not going to get crazy power from it, but you can get output that ranges from 35 to 45 watts. Most diehard vapers will recognize that they can easily get large clouds of delicious vapor at those wattage levels. That great battery will ensure that you can achieve those clouds throughout much of the day, without frequent recharges and as we’ve already said this is one of the best vaping products around for the intermediate vaper.

For a small device, it’s loaded with safety features as well. For example, there are safeguards to protect against low resistance and low voltage, as well as short-circuits. It’s always nice to know that your device is designed to protect itself and its user, right?

The SMOK Stick X8 laying on its sideThe inclusion of the X-Baby tank is brilliant, in our opinion. It offers a generous capacity of 4 ml and top airflow capability. You can also fill it from the top, which is a tremendous benefit for those who hate the messiness of using bottom-filling products – and that’s just about everyone we know.

In our tests, we had no dry hits, no leakage, and no flooding. Those are all concerns that we’ve had with other vape pens in the past, so it’s nice to see that SMOK focused attention on the smaller details. Quality matters and SMOK delivers – as usual. SMOK have, however, come a long way and their new Smok Resa Stick vape pen, is a much better improvement!

 

To Conclude

Usually, we find at least one area to criticize, but this vape pen left us completely satisfied. That’s why we have no problem with giving it our highest recommendation. If you’re a pen user and want a product that offers great cloud production and reliable quality, then the SMOK Stick X8 is the right vape pen for you.

Now It’s Available :

SMOK Stick X8 Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Smok H-Priv 2 Kit Review – Snakeskin Vapes

Snakeskin seems to be all the rage nowadays, at least where Smok is concerned. Even the long-awaited successor to one of their most popular kits hasn’t been spared from the almost ubiquitous design. The Smok H-Priv 2 brings back the raw aggressive energy of its predecessor and kicks it up a notch. It’s got the same impressive power output of 225 watts supported by 2 18650 batteries (not included) but this time includes the Big Baby Prince tank into the mix, creating a promising new package that doesn’t only look great but also works well.

Review: H-Priv 2 Dragon

 Smok H Priv 2 Review

Manufacturing Quality

It seems like we’ve begun to witness the birth of a new design trend as snakeskin/honeycomb patterns are making their way to vaping kit. While snakeskin is inherently attractive and downright stunning when done right, it can also look tacky and cheap when wrongly implemented.

Luckily in the case of the Smok H-Priv 2, its a case of the former. The scale patterns are space wide enough so as not to make the overall aesthetic seem to busy, while also letting you better appreciate the wide array of excellently finished colorways that the mod is available in.

In standard Smok fashion, the bundled tank comes in a matching color which gives the entire kit a clean and uniform look.

The Smok H-Priv 2 feels well put together without any annoying wiggle or rattle felt or heard throughout the mod when used or moved about, giving a solid feel which is always sought after in all devices. The firing bar located off to the side of the mod is a bit too wide for my liking, although bigger hands should feel right at home when gripping the device.

Firing the mod feels satisfying and responsive thanks to the tactility and stability that the firing bar offers, and misfires or accidental pressing of the firing bar is a rare occasion if not absent altogether.

The spring loaded 510 connection located at the top of the mod isn’t centered due to it having to make room for the OLED display also located up top. When comparing the display of the Smok H-Priv 2 to the screens of its other high-powered Smok cousins, you might feel that the display is a bit small and underwhelming, considering the dimensions of the mod.

Smok H-Priv 2 available colors

Personally, I’m a big fan of the tiny minimalist display, as this gives a cleaner and more streamlined look to the entire kit which lets me better appreciate the overall design.

The dual 18650 batteries are installed and removed at the bottom of the mod via the trapdoor which securely locks in place. One minor niggle is that I wish there were more battery venting holes just to give me some piece of mind, but for regular operation of the mod, battery ventilation is sufficient.

A surprisingly high-quality micro USB cable is also included with the kit which is used to update the device’s firmware or charge the batteries (although it’s always recommended to use an external charger).

Focus On www.ave40.com For More Vape Kits.   

Flavor Quality

Alongside the Big Baby Prince tank, the kit also comes with a V8 Baby-Q4 coil which is pre-installed. Built with quad coils and wicked with all-organic Japanese cotton, the Q4 produces some of the most intensely flavorful vapes to be experienced with pre-built coils.

If you’re more of a cloud chaser, the kit has you covered as well with the inclusion of the T12 coil head consisting of a staggering amount of 12 (twelve!) coils built into the thing, guaranteeing that you’ll be the belle of the ball when it comes to outputting the most amount of vapor.

Take note though that the T12 coil head practically gulps e-liquid so you’ll be refilling the tank pretty often when using these.

Power Flexibility

If vaping on the Big Baby Prince tank isn’t your thing, you’ll have the freedom to use any atomizer with a maximum diameter of 27mm. Anything larger than that and you’re going to get some overhang.

Thanks to the wide atomizer compatibility and the huge power range on the Smok H-Priv 2, you can power pretty much any kind of build your heart desires whether it might be an intense, cloud chasing setup, or a cool and relaxed build.

Aside from the standard variable wattage mod, the Smok H-Priv 2 also supports the entire gamut of temperature coils such as nickel, stainless steel, and titanium. The onboard chipset also supports intelligent atomizer recognition, meaning that as soon as you slap on a new coil build on the mod, the wattage automatically adjusts to the recommended power setting based on the coils resistance.

Basic safety features such as short circuit protection, over-heating protection, and an over discharge protection are also built into the chip preventing any untoward accidents.

Smok H-Priv 2 heating chamber

Ease of Use

Like most devices, the Smok H-Priv 2 is powered on and off by a simple 5 clicks on the firing bar. Further adjustments to the menu or various vaping modes can be made by clicking the firing bar 3 times.

Navigating the menu is pretty straightforward as Smok seems to have taken a simplified and more streamlined approach when it comes to the firmware of the mod, drastically lowering the learning curve making it a relatively easier device for beginners to use.

When it comes to maintenance of the Big Baby Prince tank, filling it up is easy as pie thanks to their refined locking system on the top cap. A simple push of a button on the top cap is all it takes to swivel it open, revealing the fill holes to drip e-liquid into. The tank also carries a good 6ml of e-liquid making frequent refills non-existent.

Portability

It’s hard to dispute the longevity of the Smok H-Priv 2 when taking it out on the field. Thanks to the dual 18650 batteries that power the mod. Going for a full day of heavy vaping is a no-brainer for this kit. But what it has in power and battery life, it slightly sacrifices overall travel ergonomics.

While the Smok H-Priv 2 is comfortable to hold and use while vaping, the same can’t be said when tucking it away for storage in your pocket. It’s wide and thick with a width of 52mm and depth of 27mm, making it one of the least pocketable mods Smok has produced so far.

The mod also has a total weight of 227 grams, and that’s without the dual 18650 batteries required to power the mod, so just keep that in mind when planning to take the Smok H-Priv 2 on lengthy outdoor excursions.

Smok H-Priv 2 parts

Overall Experience

The Smok H-Priv 2 brings good value to the table thanks to its solid construction, simple design, and powerful performance. While it might not be the most portable of devices, thanks to its bulky dimensions and weight, the battery life more than makes up for it.

Now It’s Available :

SMOK H-Priv 2 225W Kit with TFV12 Big Baby Prince

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Smok Stick Prince Baby kit Review – When Doves Vape

The vape pen has always been considered the cornerstone of vaping, and it’s safe to assume that most if not all vapers who’ve started out have owned a vape pen at some point. It’s probably the reason why Smok continues to make refinements to this form factor even when modern box mods have more or less become the norm. Their latest iteration of a vape pen comes in the form of the Smok Stick Prince Baby, a tiny twig of a device which holds an internal 2000mAh battery.

Review: Smok Stick Prince Baby kit

Smok Stick Prince Baby Review

Manufacturing Quality

Aside from the pentagonal fire button, there’s really nothing much that sets the Smok Stick Prince Baby apart from the rest of the pack. The minimalist route is usually what works best for this form factor and it’s good to see that Smok is adhering to this with its minimal branding and lack of flashy logos and lights.

That doesn’t mean that the mod is boring to look at though, thanks to the wide variety of colorways available for this mod, as it covers pretty much every spectrum available from the rainbow, including the rainbow itself.

Judging from the spartan 510 connection located on top of the Smok Stick Prince Baby, it’s pretty apparent that Smok wants this device to be a good budget option for first-time vapers as they choose their first mod to enter the hobby. The connection is decent, however, and there aren’t any annoying issues when hooking it up with the included TFV12 Baby Prince tank.

Smok Stick Prince Baby available colors

The only possible issue with the Smok Stick Prince Baby is that you’re limited to using atomizers with a diameter of 22mm maximum as anything large will produce an unsightly overhang.

Flavor Quality

Like most mechanical or smart mechanical devices, the flavor and vapor quality you’ll be getting are largely dependent on the coils you’ll be using. Luckily, while the Smok Stick Prince Baby might be simplistic in design, it doesn’t skimp on the included coils.

Bundled with a V8 Baby Mesh coil rated at 0.15 ohms and a Baby M2 dual coil with a resistance of 0.25 ohms, the kit gives you a couple of options right off the bat on how you’d like to vape.

It’s important to note that for a smart mechanical mod like the Smok Stick Prince Baby, the output it produces is inversely related to the resistance of the coil, so the lower the resistance of your installed coil, the more wattage gets drawn from the battery and gets pumped into the coil.

Having said that, it’s good to see that the included mesh coils have a relatively low resistance, allowing the mod to produce up to 80-100 watts of vaping power give or take, which should be more than enough for most vapers.

If 100 watts sounds a lot to you (which it is) the dual coil is a good alternative for vapers who’d like a more relaxed vaping experience. Flavor and vapor density is great on either of these included coil heads, so you shouldn’t have an issue getting the performance you want out of this mod. Airflow is sufficiently smooth thanks to the fully adjustable airflow ring at the bottom of the Baby Prince tank which lets you dial in your exact settings.

Focus On www.ave40.com For More Vape Kits.   

Power Flexibility

The Smok Stick Prince Baby is a pretty barebones device. This means that you won’t have any of the advanced features that fancier box mods have such as variable wattage, temperature control, adjustable TCR, or pre-heat wattage curves to assist and/or enhance your vaping experience.

On the other hand, this makes the kit a lot easier to use and more accessible for the tech-allergic vaper who hates fiddling with their mod which can be a good thing.

Unlike the other tube or pen-type mods that Smok has released, the Smok Stick Prince Baby doesn’t operate using a fixed wattage. So you’re free to lower or increase the power output produced by installing coil heads of various resistances, allowing you to get the power you want out of this vape.

To sum it all up, you get all the functionality of traditional mechanical mod, without any of the drawbacks to safety, as the mod comes with an extensive set of protections that ensure the safest possible vaping experience.

Smok Stick Prince Baby flat display

Ease of Use

The Smok Stick Prince Baby is one of the easier devices to get familiar with. The Prince Baby tank uses a threaded design to remove or install coil heads for easy replacement. There aren’t any complicated menus that might get in the way of what’s a simple and straightforward vaping mechanism.

The tank already comes with a mesh coil pre-installed, so all that needs to be done after unboxing is to fill the tank with e-liquid, click the fire button 5 times to turn it on, and you should be all set to start vaping.

The Prince Baby tank can hold up to 4.5mls of e-liquid which means that you won’t have to refill often. Even refills are a lot easier with this tank as it uses a push-swivel mechanism that makes one-handed refills a walk in the park, a feature which is priceless for vapers who tend to be on the go most of the time.

Portability

The Smok Stick Prince Baby is practically designed and built to fit easily into your pocket. With a height of 137mm (tank included) and a width of 26mm, its easily one of the smaller yet high powered devices in the market today.

The low weight of 133 grams also make the device easy to carry in your pocket or bag without feeling heavy, and the smooth tubular shape makes it easy to slide in and out of your preferred storage solution.

The integrated 2000mAh battery can be a hit or miss depending on the coils installed in the mod. If you opt for the mesh coils that come with the kit, you can expect the need to recharge the Smok Stick Prince Baby at least once a day to get a full day’s worth of vaping out of it. Other higher resistance coils will help extend the lifespan by a huge margin though, so keep that in mind before picking up this kit.

Smok Stick Prince Baby mouth piece detached

Overall Experience

The Smok Stick Prince Baby does a lot of things right. The small form factor design and the decision to go for a smart mechanical type of operation is the way to go to let vapers decide their desired output without weighing the mod down with a lot of features that most vapers will never use.

Just take note of the rather middling battery life which can get in the way of high powered coil builds as these will inevitably deplete your battery midday requiring you to recharge your mod which can be a pain for some users.

Now It’s Available :

Smok Stick Prince Baby Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

 

VOOPOO Panda AIO Under Starter Kit Preview

VOOPOO Panda AIO Pod Starter Kit

VOOPOO Panda Introduction 

The VOOPOO Panda AIO Pod Starter Kit is the newest device from popular vape manufacturer VOOPOO and set to release in late June or July 2018. It’s an internal battery pod system with included pods for both high mg nicotine salts and lower mg freebase nicotine juices. It’s available in 5 colours: Black/Silver, White/Black, Black/Red, Black/Yellow, and Blue/Gold.

VOOPOO Panda AIO Pod Starter KitVOOPOO Panda Kit Specs

  • Size:75*47*27.4mm
  • Capacity:5ml
  • Wattage:12W or 8W
  • Resistance:0.8ohm/1.2ohm
  • Battery capacity:1100mah
  • Charging: USB/1.5hours
  • Switch timeout protection
  • Short-circuit protection
  • Overcharge protection
  • Over-discharge protection

VOOPOO Panda Kit Packaging List 

  • Panda pod kit
  • Two Replacement pods
  • Sealing O-rings
  • USB cable
  • User manual
  • Warranty card

Preview

The VOOPOO Panda Kit is a new Pod AIO (All-In-One) device from VOOPOO. The main draw of this mod is it’s super lightweight and easy to carry plus refillable pods you can swap out on the go. The mod itself is a plastic body and coated in rubber for a nice soft feel to it and nice grip. It’s a tiny pod system one of the smallest for this kind of device (smaller than the Wismec Hiflask and Joyetech Dolphin) and features a large 5ml capacity. The mod uses a 5 click to turn on and off. There is a front-facing LED that lights up when firing or charging the device.

The top cap comes off easy thanks to being magnetic and the pod itself is very easy to get out to refill or change. It just drops into place when you throw on the top cap again. Airflow is non-adjustable and on the bottom of the device but you can use a finger to cover some of it up if you want a tight draw. As it stands now it’s somewhere between a loose MTL and a tight DTL. The Panda has a bunch of safety features as well. A 10-second timeout, short protection, overcharge protection, and over discharge protection. It’s very ergonomic and comfortable to hold. It has a 1100mah battery built in and charges in 1.5 hours.

VOOPOO Panda AIO Pod Starter Kit

Preview

It comes with both pod options. One has a built in 1.2-ohm coil and fires at 8 watts. The other has a 0.8-ohm coil and fires at 12 watts. They claim one is for regular juice and the other is for nicotine salts but at 12 watts it’s fine to use high mg nicotine salts in. The pods are very easy to get in and out and easy to full with a fine point bottle. Twist cap or glass drippers aren’t as easy.

It’s a very nice and small and comfortable pod system. The rubberized finish gives it a great feel and the size makes it very portable to grab on the go. It has all the makings to be one of the top pod systems for 2018 as long as the coils can perform and give good coil life. The low watts make it ideal for high MG nic salt juices and should be a good device for people looking to quit smoking. Voopoo has an excellent track record as well for quality products at an affordable price especially with the very popular drag mod which is what put their name on the map and made them popular in the vape community. It’s nice to see them work on a beginner device now as those are always welcome.

VOOPOO Panda Final Thoughts

Overall I’ve been using this for a couple of days, not enough time to do an actual review, but wanted to give my first impressions for those who are impatient. I’m only using the 0.8-ohm coil so far with nicotine salts and I have to say it’s a really nice device I’m enjoying.

Now It’s Available :

Voopoo Panda Refillabe Pod System Nicotine Salt Kit

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

HugsVape Magician Mesh Sub ohm Tank – non-service to the heap

And again HugsVape, you say. Yes, these guys do not waste time. Just yesterday, we met with their first AIO set, and I said that they plugged all the holes in assortment variety. An, no – they didn’t have non-services before that. Now there is such a one – we will wait now for a full-fledged boxing mod for it. For now we get acquainted with a novelty.

HugsVape Magician Mesh Sub ohm Tank 
HugsVape Magician Mesh Sub ohm Tank -
Case material: stainless steel
Atomizer type: maintenance-free
Evaporators: 0.13 / 0.15Ω
Capacity: 3 / 5ml
Diameter: 24mm
Dimensions: 53.33mm with Drip type
Connector: 510, pin gold-plated
Weight: unknown
Color:see photo below
HugsVape Magician Mesh Sub ohm Tank -
Package contents
– Magician Mesh Sub ohm Tank
– replaceable evaporators 2pcs Kanthal 0.13 / 0.15Ω (one preinstalled)
– adapter for 510th drip types
– spare Orings
– spare glass
– user manual

Focus On www.urvapin.com For Best Vape Tanks.

HugsVape Magician Mesh Sub ohm Tank -
The traits that have been set are clearly traced in the exterior of our hero Lotus RTA pilot project . Therefore, we can already speak about the corporate style. In general, the tank looks nice and is somewhat different from the usual idea of ​​non-services.
HugsVape Magician Mesh Sub ohm Tank -
From the start, the developers suggested five color options – excellent, not a special abundance, but very good.
HugsVape Magician Mesh Sub ohm Tank -
Drip type is probably 810th, made of plastic and has a specific shape. Below it is a hinged lid on the latch – and that, quite a decent option for the “lazy” who prefer this segment. Medium-sized openings for refueling are all just like in humans.
HugsVape Magician Mesh Sub ohm Tank -
The capacity is average, but the complete bubble glass can increase it to 5ml, and this is already something. Plus, with such a tank does not look particularly cumbersome.
HugsVape Magician Mesh Sub ohm Tank -
The novelty feeds on two types of replaceable evaporators on the grid. And in one case it is a double mesh coil, and in the second a triple. Fell these guys will be very decent.
HugsVape Magician Mesh Sub ohm Tank -
For the adjustment of the air supply there is in the answer a rotating ring at the base of the atomizer. Relief risks have provided, air intake holes of a very decent size – just to match the replaceable evaporators.
HugsVape Magician Mesh Sub ohm Tank -
As a rule, such releases occur before the presentation of the boxing mod, since launching a separate non-service separately is still a pleasure. Therefore, I can assume that soon the guys will get their own boxing mod.

Pin is gilded and stands out enough.

Now It’s Available :

Hugsvape Magician Subohm Tank

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

GeekVape Baron RDA – multifunctionality, where?

The company GeekVape presented its latest novelty. She was, as they say, a double-helix drip with a multi-function blowing system. Let’s understand what it is so multifunctional and indeed what is what. 

GeekVape Baron RDA
GeekVape Baron RDA - multifunctionality, where? ...
By the way, I stumbled upon one post in social networks, in which Vapeam “complains” that they say that not so long ago GeekVape acquired from them at that time a new product Muse RDA . Even then, the developers suspected something was wrong. After that, after some time, they will present their dripka, which looks like the above. I understand that such cases are far from rare, I will not interfere and express my opinion. I leave everything to you at the mercy. 
GeekVape Baron RDA - multifunctionality, where? ...
Case material: stainless steel 
Atomizer type:RDA 
Capacity: medium 
Diameter: 24mm 
Height: 28.8mm with Drip type 
Connector: 510, pin gold-plated 
Weight: unknown 
Color: see photo below 
GeekVape Baron RDA - multifunctionality, where? ...
Package contents 
– Baron RDA 
– pre-wound helix 2pcs 
– cotton 
– skvonk 
– hex 
key – screwdriver 
– adapter for 510th drip types 
– additional 810th drip type 
– spare oring 
– spare screws 
– spare glass 
– user manual

Focus On www.ave40.com For More Vape Tank.

GeekVape Baron RDA - multifunctionality, where? ...
Our hero looks pretty decent, neat. Decor at least, they can be considered unless the grilles of blowing and a kind of drip types. The form factor is fitted, I would like to focus on the dimensions.
GeekVape Baron RDA - multifunctionality, where? ...
If the developers correctly “counted”, then the novelty is very shallow in height, however, this advantage has another side – significant heating. But only reviewers can shed light on this moment.
GeekVape Baron RDA - multifunctionality, where? ...
There are two types of drip, both are 810s. One is made of resin, the second of ultem. There is an adapter for the 510th colleagues, only if it will be needed.
GeekVape Baron RDA - multifunctionality, where? ...
The dome and side skirt are one piece, the internal processing is unknown. On its side there are two symmetrical airflow grids. Adjustment of air supply is carried out by turning the dome relative to the base, there are risks for convenience.
GeekVape Baron RDA - multifunctionality, where? ...
Next, we stumble on the ring blowing, it sits on the deck, apparently, tough. It has two pairs of grids, they can be rotated. So what kind of multifunctional is it. Right, even funny, sorry for the indiscretion.
GeekVape Baron RDA - multifunctionality, where? ...
Deca is very simple.
GeekVape Baron RDA - multifunctionality, where? ...
Two racks for correct fixation of two spirals. Installing the latest counter.
GeekVape Baron RDA - multifunctionality, where? ...
The capacity of the bath is decent, plus a skvonk pin comes included. By the way, the area between the uprights is made in the shape of the roof of the house – oh, how. And yet – a special ring prevents the passage of fluid into the evaporation chamber.
GeekVape Baron RDA - multifunctionality, where? ...
Both pins are gilded and perform well.
GeekVape Baron RDA - multifunctionality, where? ...
GeekVape Baron RDA - multifunctionality, where? ...

Now It’s Available :

Geekvape Baron BF RDA

  Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

Coil Master Matrix Mech Mod – they will soon be able to fence the fence

Coil Master continues to clone its mechanical mods, not just producing interchangeable plums, but announcing a new product each time. This time, they slightly changed the main color of the case – now it is “darkened” brass, well, at least something different is nice. But probably it’s time to stop, guys. You have already made them so much that they can enclose sections of them))) 

Nevertheless, we have Coil Master Matrix Mech Mod . 
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
Dimensions: 93 x 24mm 
Weight: 175.5g Case 
material: brass 
Power supply: built-in 1 * 18650 
Connector type: 510, hybrid 
Color: tinted brass 

Equipment
– Matrix Mech Mod
– gift box 
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
So, once again we are trying to find ten differences between the new fur and the previous one. And yet they are – now the color of the metal of the main body is tinted. Naturally, the replaceable drain has also changed – it repeats the texture of the grille of luxury cars – the manufacturer says so on his official page. This structure reminds me of fish scales, maybe because I am a fisherman))) 
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
Okay, let’s leave the associative thinking alone, in general, the fur mode looks solid, let’s see what it will be in the future debriefing.
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
The landing pad, as expected, did not change its “pattern”. Hybrid connector, adapter for non-hybrid, as it was not included, so it still is not. Although some manufacturers of their devices are much less expensive to complete the latest. Perhaps this is not necessary, and most of them simply do not come in handy. I personally have this connector lay in the box – I never got it. 
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
By plum everything is clear, I hope. It is metallic, standard size – all plums of previous models will fit here absolutely calmly. The unpleasant moment of the relief structure of the drain is that it will collect garbage from your hands. 
The main pipe, as I understand it, is nickel-plated from the inside. It still remains rather thin-walled. The threads on the connector and the button are not small, which is good.

Focus On www.urvapin.com For More Vape Start Kit.

Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
The button has not changed. It also uses a magnetic construct. The contact group is made of copper, the contact patch is pretty solid. The same six air vents surround the bottom, pushed part of the button. Here, the traditional logo of the manufacturer.
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...
Advantages / disadvantages
+ design
– constructive buttons
– price)
Coil Master Matrix Mech Mod - they will soon be able to fence the fence ...

Now It’s Available :Coil Master Matrix/Jeans/Groot Mech Mod

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA

 

OBS BAT Kit Reviewed: Crazy Flavour, Cloud And Performance, OBS Is One To Watch!

obs bat mainIntroduction – The BAT Kit With Damo Tank By OBS

The OBS BAT kit is from a brand I haven’t had the pleasure of trying before. Nothing excites me more than picking up a product from a brand I’ve never tried and being absolutely blown away.

The BAT kit from OBS is just such a product. You may notice that the device in the photos I’ve added looks like it’s been to hell and back…it has, I’ve put this kit through some rigorous testing the past 2 weeks, camping trips and hotel rooms, the kind of chaos I don’t have the space to write about here. I’ve filled this tank more than 35 times and I am still deeply in love…

Having enjoyed the ridiculous English on their website a little too much (bless them), let me wipe the tears from my eyes and tell you what I know about OBS Shenzhen Technology.

Founded in 2014 and having made a handful of good-looking tanks like the Crius 2 RTAand Crius RDTA, the V Tank, the Engine and the Engine Nano RTA… the BAT mod is actually the brand’s first Mod and vapers, I can tell you that this brand is one to watch!

A solid, high-performance dual 18650 device with little or no cons and a tank to rival the best sub-ohm tanks on the market, when it comes to cloud and flavour.

Did I say I was impressed? I am impressed! What’s more, I’m a sucker for cray-cray, colourful LED action and there’s more than enough of that with the OBS BAT kit.

Focus On www.urvapin.com For More Best Vape mods.

What’s In The Box

  • 1 x BAT Mod
  • 1 x USB Cable
  • 1 x Damo Tank
  • 1 x 510 Adaptor
  • 1 x M6 OCC 0.2 Ohm Coilhead
  • 1 x M2 OCC 0.4 Ohm Coilhead
  • Spare Glass and O-rings etc

    obs bat mod open

Features Mod

  • Dimensions 90 x 46 x 32 mm
  • Weight 180g
  • Output 7-218 Watts
  • Resistance Range 0.1-2 Ohm
  • Temp Range 100-315 C
  • Output Voltage 0.1-8.4 V
  • Runs on dual 18650s
  • 7 LED colours built in
  • Short circuit, overcharge and high temp protections
  • Comes in red, yellow, black and blue

Features Tank

  • Dimensions 25 x 55mm
  • 5ml Capacity
  • 510 Threaded
  • Stainless steel 304
  • Pop up side fill
  • Bottom adjustable airflow
  • Runs on dual 18650s
  • available in SS, black, gold and blue
  • Compatible with Big Baby Smok Coils

Build Quality & Design

BAT Mod

The OBS BAT Mod is a narrow, elongated rectangular, dual 18650 device with flattened horizontal edges to the two narrower sides.obs bat vape mod and Damo tank

On receipt of the neat black and yellow OBS box, I opened up to find a hefty 180g, zinc alloy device.

obs bat mod 510A deep, springy gold plated 510 connection sits at the centre of the upper surface and 2 ‘bat wing’ inlays either side the mod double as LED lights (on the screen side) and battery vents (on the battery cover side).obs bat back

These inlays are mirrored in the moulding of the zinc alloy, which effectively draws your eyes toward the mod’s large, bright display…which has an identical format to the Alien 220 mod from Smok and, I dare say, the layout and chipset may actually be the same as Smok’s, though my research hasn’t unearthed whether or not these brands are in cahoots, although the inter-compatibility of their coils and this user interface tell me this may well be the case.

Below the screen panel on one side of the mod, you’ll find the micro USB port, which is good for upgrades as well.

Above that and within the screen panel, you’ll find two small, diamond shaped and super clicky, responsive adjustment buttons, with grey OBS branding (on my black version) in the upper right corner of that side.

The panel opposite the screen side pulls away very efficiently with the help of 4 huge, round magnets, to reveal a snug and very nicely worked battery chamber with big, quality connects and prominent markings.

There are massive, accessible tabs either side the panel to aid you when removing the battery cover. There are absolutely no shakes or rattles and the overall feel is one of high quality and solid workmanship.

The base reveals 4 tiny corner screws.obs bat mod base

When facing the screen, the narrow side to the left is home to the niftiest, clickiest, most responsive fire button you could hope for, stainless steel with that concentric circle texturing I love so much.’

I love the sleek look and ergonomics of this mod and popping in those cells, I’m delighted to discover a range of seven LED colours, easily customizable, that light up the mod. Nice one!obs bat mod fire

DAMO Tank

The OBS Damo Sub-Ohm tank is a high capacity, 5ml tank with a beefy, 1 cm airflow ring at the bottom, easily adjustable thanks to nice diamond knurling all the way around.

Dual 1.5cm x 1.5mm airflow slots either side mean you will not be left wanting if you like EXTREME airflow.

The thick, 1cm top cap has the OBS branding sunken into it by way of knurling and a tapering 810 mouthpiece/driptip/plate can be removed and swapped out with the help of the included 510 adaptor.obs bat kit damo exploded view

Pull the topcap upwards to reveal the easy side fill system, with a delicious, hydraulic like feel to the whole thing that just leaves a person very, very satisfied.

This is a beautiful, well made, solid looking sub-ohm tank.

How Does The OBS BAT Kit Perform?

I didn’t know what to expect from the OBS BAT kit, never having sampled OBS wares before…not to mention the fact that this is the first vape mod offering the brand have released. Triple Kudos to OBS on an outstanding first MOD.

Solid and sturdy, with a beautiful fire button, instant ramp and a UI that couldn’t be simpler to navigate or more convenient.

The mods aesthetic makes it a perfect match for just about any of my sub-ohm tanks, RDAs and RTAs and performance is right up there, rivalling the very best of my dual 18650 mods.

New atomizer detect and resistance readings on the money, without fail.

I’ve tested TC for Ni and SS and found the readings accurate, with the settings I tested feeling true.

I can’t tell you how much I like the multi colour LED detail, which I set to display when firing, 7 different colours all bright and vibrant…for some added UFO action in the dark, delightful!obs bat yellowobs bat redobs bat blue

I really did put this mod through the gauntlet, resulting in some chips to the paint job but I stress that I’ve been more than rough with this mod and it’s held up like a trooper, mwah!

As for the DAMO…what…whaaaat?????!!!!!!
This tank is phenomenal.

It’s noisy, the airflow is noisy but with these coils…ooh, flavour, cloud, for days and through the freaking roof.

Imagine my surprise when reviewing a range of e-juices and realizing that the flavour from the Damo with these M6 coils is equivalent to that of a popular RDA I had set up on another device. I am more than impressed with this tank.

I absolutely love this tank.

How To Fill The OBS Damo Tankobs bat damo fill

  • Pull up the top cap
  • Fill through the massive side fill slot

How To Change the Coil

  • Twist the glass anticlockwise to remove from the base
  • Unscrew the coil head
  • Replace

Stock Coil Performance

Hmmmmm…now, I’ve mentioned that these coilheads are interchangeable with those from Smok’s Big Baby, so I figure it makes sense to draw a comparison.

I find these coils superior to Smok’s…

The M6, 0.2 Ohm coil with it’s 40-80 recommended wattage range is a wonderwork of flavour and cloud.

At 50W I’m experiencing the cloud I’d expect at 70W, with flavour that I think can only be rivalled by an RDA, I’m able to taste the full profile of even the most complex of my flavours, which really says a lot about this coil. 65W is my sweet spot for this M6 coil.

Before you knock it, remember, this is just my opinion. All I’m saying is, these coils have knocked my socks off.

As for the M2, 0.4 Ohm coil, with it’s recommended range of 30-50W…once again, a cloud beast, with flavour obviously slightly less profound than that of the M6 but no less miraculous. I love this coil at 45W.

How To Operate the Menu System

  • 5 clicks on
  • 3 clicks to access menu system
  • +- to adjust
  • long click to select
  • 5 clicks to lock

How To Replace The batteries

  • Pop off the battery cover
  • replace batteries

Battery Life

Excellent, a full 14 hours on dual Samsung 2500s at a 60 W setting. The LEDs draw very little power, regardless of setting.

Pros

  • Solid handfeel, good weight and ergonomics
  • Fun LED lights
  • Intuitive UI and responsive chip
  • Awesome fire button with great ramp time
  • Crazy Flavour
  • Mean ass cloud action

Cons

  • The paint job has started to chip…but I’ve been rough with it.

Final Review Verdict

The OBS BAT kit comes highly recommended, if you want exceptional flavour, stuuupid clouds and a sturdy as hell box mod with cray-cray party lights…you can not go wrong here.

I’m 100% satisfied with the performance on this mod and tank and I will be keeping my eyes peeled for the next release from this young but competitive brand. Still recovering from the flavour shock I got from the Damo Tank…other brands better watch out!

And..

Would I buy this if I lost/broke the device? Definitely!

Now It’s Available :OBS Bat 218W Box Mod

Hot Sale Recommendation:

Hellvape Dead Rabbit RTA

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

smoant naboo

Hellvape ReBirth RDA