HUGO Vapor Kylin 30W Pod Mod Kit Review

AIO-systems have recently become more and more popular, because, unlike POD-systems, the viper has the ability to independently change the evaporators (and in some models even just a spiral) and set the optimal power for it. Such an approach to closed systems allows the vaper to choose not only the rate of vaporization, but also the temperature of the vapor, and this is an important point for many users. Manufacturers have become very active in this direction, and therefore not a day goes by without a new AIO system appearing on the vape market. Hugo Vapor also decided to “light up” in this segment, so the light was seen on the KYLIN Pod System device (not to be confused with KYLIN from Vandy Vape). This AIO system will appeal to many vapers who want a functional, compact,

General information

The Hugo Vapor KYLIN Pod System is a compact AIO system equipped with a powerful battery that runs on a simple but powerful board with removable cartridges on replaceable evaporators. The form factor in which this device is manufactured is not new, but the device is very convenient to use and maintain. The manufacturer supplied the AIO system with a productive and reliable motherboard operating in the varivatt mode. Using a small display, you can control the operation of the device. Removable cartridges are very convenient to operate, as they are designed for the use of replaceable evaporators and have a convenient refueling system. You can buy the Hugo Vapor KYLIN Pod System in eight versions, four of which are classic resin, and four others are original prints on the side panels.


This AIO-system is equipped with quite standard, but at the same time, after purchase, the vaper can safely fill in the liquid, charge the battery and soar. In a vaper box waiting for:

  • KYLIN Mod Battery Pack;
  • Preset KYLIN Pod cartridge;
  • 0.6 Ohm Mesh Coil Evaporator (pre-installed);
  • 1.2 Ohm Regular Coil Evaporator;
  • Type-C USB cable for charging;
  • Warranty Card;
  • User’s manual.

KYLIN Mod Battery Pack

Hugo Vapor is not very happy with new products for vapers, but those devices that are released from time to time find their fans almost immediately. Hugo Vapor KYLIN Pod System immediately after the appearance of many vapers interested in not only its functionality and performance, but also the original design. The manufacturer offers the device in two design formats – with many familiar resin side panels and original prints, thanks to which the vaper will receive a unique device.

The form factor of the Hugo Vapor KYLIN Pod System will cause a small smile for experienced vapers, as this is another device made in the walkie-talkie form factor, like the well-known Orion from Lost Vape. But at the same time, it is just such a form factor that can rightfully be considered a win-win option that many vapers love.

The power of this AIO system is provided by a built-in 1000 mAh battery, which is practically standard for devices of this format. The battery is charged for about an hour using a traditional micro-USB Type-C connector, located on the side panel, with a current of 0.8A.

An important feature of the device is that it is equipped with a chipset, which not only provides a complete set of protections, but also allows you to use the Hugo Vapor KYLIN Pod System in the variable mode with a power of 5-30 watts. At the same time, a small display is visible through a window in a removable side panel held by magnets. Management is implemented using two buttons under the same panel.

KYLIN Pod Cartridge

It is worth paying tribute to the developers of Hugo Vapor, who decided to use a cartridge with replaceable evaporators – they are really more convenient to use. To install the evaporator, the vaper will have to unscrew the filling plug, and only then remove or replace the cartridge.

The manufacturer offers two options for evaporators – on a grid with a resistance of 0.6 Ohms and on a standard spiral with a resistance of 1.2 Ohms. An important feature of both evaporators is that they are designed for tight cigarette puffs. There is no airflow adjustment, and a hole in the side panel is used for air intake.

Charging the device is very simple and practical – at the top end there is a metal plug, by unscrewing which you can pour 3 ml of liquid. It is worth noting that the side removable panel has a special window for monitoring the liquid level in the tank, so there is no need to constantly remove the panel in order to see how much liquid remains.

Conclusions and impressions

Hugo Vapor KYLIN Pod System is a decent device that will definitely interest vapers who want an easy-to-use and functional device. Naturally, there are certain questions related to blowing, but overall this is a good AIO system that will definitely please fans with a tight cigarette puff.

Advantages and disadvantages


  • Lack of airflow adjustment;
  • Only MTL evaporators can be used.


  • Compact size;
  • The original design;
  • Capacious battery;
  • Two types of evaporators;
  • Convenient gas station;
  • The ability to set the working power;
  • Simple operation
  • Decent flavor.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: HUGO Vapor Kylin 30W Pod Mod Kit
Hot Sale Recommendation:

Eleaf Rotor Sub ohm Tank

Smok RPM40 Vape Pod System Kit

Geekvape Aegis X TC Box Mod

Damn Vape Diamond MTL RTA

OBS Land Vape Pod System Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. 2m*1i9y0a7j*

Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.



Leave a Reply

Your email address will not be published. Required fields are marked *