Vapefly Mesh Plus RDTA- A new choice for mesh wire fans

Vapefly Mesh Plus RDTA is a new serviced bacomizer from Vapefly. Mesh format devices are gaining more and more popularity due to their ease of use and maintenance, so more and more companies are developing new “mesh” devices. This device has a similar base as the Mesh Plus RDA dipstick atomizer of the same name, however, the novelty has acquired a liquid reservoir, which will allow you to enjoy the soaring process for a long time with comfort. In addition to the possibility of installing the grid, both devices can easily accommodate regular spirals.

Vapefly Mesh Plus RDTA 3.5ml

Contents of delivery:

 

  • Vapefly Mesh Plus RDTA;
  • spare flask;
  • 6 grid segments;
  • 2 prewound spirals;
  • adapter under the 510th drip-type;
  • screwdriver;
  • rem-kit;
  • napkin;
  • user’s manual;
  • warranty card.

 

Atomizer size: 25 mm * 51 mm (including the complete drip type). Weight: 55 grams. Available in black, steel and rainbow color.

Structurally, the atomizer is disassembled into 6 parts: the lower platform, flask, base, dome, top cap and drip type. The complete drip-type 810-th unmarked, made of Derlina, if necessary, is replaced by the same. Also included is an adapter for the 510th drip type.

Top-cap has convenient notches for unscrewing. On the lower part there are 2 kerfs on both sides for air supply. The inner part has a spherical treatment, which has a positive effect on the taste characteristics of the atomizer. On the dome are similar holes for adjusting the air supply, as well as the logo of the device is engraved. On the inside of the dome, at the very bottom, there is a wide sealing o-ring, due to which there is a reliable fixation with the base.

Vape Wholesale Supply,Vape Wholesale China – AVE40

The base is without rack, it has 2 massive plates, in which the legs of the spirals or grid segments are installed. Fixation occurs at the expense of 2 screws in each plate, screws under the slotted screwdriver. In the lower part of the base there are cuts for laying cotton. Directly under the base is a reservoir for the liquid. The flask is made of Pyrex glass and can hold up to 3.5 ml of liquid. Below the atomizer is a well-protruding adjustable connector and a company logo.

Features of Vapefly Mesh Plus RDTA :

 

  • stylish design;
  • excellent taste transfer;
  • the possibility of using spirals and mesh;
  • good steam generation.

 

In addition to this atomizer, you can purchase the net, issued by Vapefly, especially for its “grid” devices. Vapefly Mesh Plus SS316 can also be used with designs from Vandy Vape .

The grid is supplied in fifteen cuts, which are ready to be installed on the base of the aforementioned devices. The grid is made of stainless steel and in fact can work not only in the modes of varivatt, but also supports the work in thermal control. The manufacturer recommends using power from 50 W to 70 W, and set the temperature in the thermal control in the region of 270С-290С for optimal winding taste sensations. The final winding resistance after installation is of the order of 0.12 ohms – 0.18 ohms.

You can also see the review on Mesh Plus RDA , which is an exact copy of the Vapefly Mesh Plus RDTA for the design features of the base and airflow.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vapefly Mesh Plus RDTA
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Q16Pro Vape Starter Kit

Voopoo Alpha Zip TC Kit

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Starter-Kits:https://www.ave40.com/starter-kits/disposable-pod-system-kits

Vapefly Galaxies MTL Starter Kit Review

The company Vapefly after a long lull, right over again perfume a lot. Not so long ago, they presented a new mtl dripku, a little later serviced by the AIO set, and now they have started the mtl segment again. They present a starter kit with a cigarette puff. Well, that – we will look. 

Vapefly Galaxies MTL Starter Kit 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Dimensions: 80 x 19mm (mod only) 
Weight: unknown 
Case material: stainless steel 
Power supply: built-in 1400mAh 
Output power: up to 30W 
Voltage range: 3.2 – 4.2V 
Operating mode: POWER 
Resistance supported: 0.5 – 3.0Ω 
Protection :from low / high resistance, from overheating, from short circuit, from recharge / overdischarge 
Connector type: steel 510, pin gold-plated, spring-loaded 
Screen / diagonal: no 
Micro-USB port / charging: yes, charging current 0.8A 
Color: see photo below 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Galaxies MTL tank 

Case material: stainless steel 
Atomizer type: maintenance-free 
Evaporators: 0.5 / 0.6Ω 
Capacity: 1.8ml 
Diameter: 19mm 
Height: 46.4mm with Drip type 
Connector: 510, pin gold-plated 
Weight: unknown 
Color: see photo below
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Equipment
– Galaxies mod
– Galaxies MTL tank
– 2pcs 0.5 / 0.6Ω replaceable evaporator (one is preinstalled)
– spare glass
– spare origings
– USB cable
– user manual
– warranty card
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
The appearance is unremarkable – there is nothing special about it. Form factor vape pen, rounded profile. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
A full tank – detached from the hull. Its capacity is not so big, it will refuel from above. By the way, the drip type is removable, it seems, the 510th landing. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Replaceable evaporators are two types, one of them is executed on the grid. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Replacement is made from the bottom – in principle, everything is standard.
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
But with the adjustment of tightening tried – as many as nine customization options. There is an oblong slot and a single point. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Trubomod instance is quite simple. Maximum landing, as you understand, only for 19mm. 

The centerpiece of the device is a large fire button. It is girded with LED indicator. In addition to its main function, it can change the output voltage. Total provided, as I understand it, three modes. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Built-in battery of a good capacity, it will take more than an hour and a half to charge it “to the brim”. The developers identified the causal connector on the side surface directly below the connector. 
Vapefly Galaxies MTL Starter Kit - a set with a decent adjustment of the blower ...
Price $ 29.9

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vapefly Galaxies MTL Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Vaporesso Luxe 220W TC Kit

Smok Trinity Alpha Starter Kit

Voopoo Drag Nano Kit

Artery PAL II Pod Starter Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html