Vladdin Eden Vape Pod System Kit Review

Vladdin Vape has released a new product on the vaping market – Vladdin Eden. The device is a closed POD-system with a unique design, which, according to the manufacturer, must be appreciated by fans of the electronic pair.

vidndvape

Equipment

Vladdin Eden Device, recharged Vladdin RE Replacement Pod, charging cable, instruction.

vidpoda

Dimensions

Height: 77 mm, 
Width: 37 mm, 
Thickness: 15.5 mm.

podiku

Technical specifications

Supported resistance: from 1.2 to 1.5 Ohm, 
Maximum charge current: 5V /0.4 A, 
Battery capacity: 350 mAh, 
Tank capacity : 1.5 ml,

Overview

The cartridge received a non-removable mouthpiece of black plastic. Refueling occurs on top after shooting a driptip. The reason for this decision is not known. One of the advantages is that you do not have to pull out the cartridge for refueling from the mod. But in this version you will have to grasp the drip-type with your hands in the hands, which is not quite hygienic. The body of the tank is transparent for easy tracking of the fluid level. The reservoir holds 1.5 ml.

egopod

The patented ceramic coil is used as a coil. The manufacturer does not indicate his exact resistance, but it is within 1.2 Ohm – 1.5 Ohm. There is no information about the location of koil. The tank is fastened by the magnets in the bottom.

cvettapod

The battery pack is available in four colors: blue, black, red and white. For carrying, the manufacturer has equipped the device with a special removable lid so that dirt does not fall into the drip tip.

Cover housing, according to the developers, does not collect dust. On the case there is only a charging connector on the bottom. No more buttons on the mod. On the side is the name of the campaign and a small diamond, which can be an LED indicator. The capacity of the built-in battery is 350 mAh. With a charge current of 0.4 A, the mode charges in about an hour via the microUSB port.

nizpoda

The electronic cigarette works when tightened and produces a constant voltage over the entire volume of the battery. The manufacturer does not indicate the exact value either.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Vladdin Eden Vape Pod System Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Dovpo Topside Dual Squonk Box Mod

Vladdin Device RE Pod System Full Kit

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Dovpo Topside 90w Squonk Mod Review

The company Dovpo in the portfolio last summer also appeared skvonk device, brick  Basium Squonker on two 18650, resembling a fat cuboid with a bottle. In it, the most interesting can be called a slide system, designed to save the user from the frequent misfortune of all skvonkov – fluid, uncontrolled poured out of the dropper when installing the bottle. But in general, it was still slightly different from what we had seen before, since it also required filling the jar in the old manner. Last fall, the manufacturer joined forces with The Vapor Chronicles YouTube and introduced a new, already battery-powered 20700 and 21700, much more interesting and perhaps even truly innovative idea in its Topside Squonk device . The idea and implementation, which turned out to be so simple and obvious, that at the first look at the device there is only a dumb question:“Why? Why did no one think of this before ?! ”

Packaging Topside Squonk Mod FrontPackaging Topside Squonk Mod at the back

Packaging Topside Squonk Mod

The first thing that attracts attention is packaging. The box is sealed in cellophane, on the cardboard plum you can see your future skonk, its color (the image corresponds to the design, there is an inscription Black in a black diamond) and the name, read about the fact that we have just another game changing mod and in general first top fill Squonker , find a listing of characteristics, a sticker with a check of originality and a bunch of different small inscriptions and pictograms. Suddenly, under the cardboard there is a durable plastic case!

Packaging Topside Squonk Mod

The lid with large holes and the device’s logo in the form of a pointed letter T (suspiciously reminiscent of Tesla, isn’t it?) Just shifts to the side and hides under it just an armful of waste paper, under which the device itself is already located. The only complaint about such a wonderful package is the hellish smell of burnt plastic, with which it “smells sweet” long after its opening.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Topside Squonk Mod Kit

  • Squonk DOVPO Topside Mod (without a battery)
  • Micro usb cable
  • Fixed bottle
  • Replaceable bottle
  • 18650 Battery Adapter
  • User Guide (in English)
  • Many varied waste paper

In addition to a pile of papers and a box mod with an adapter for 18650 batteries hidden inside, there was a nice blue noodle cable in the box for charging and flashing the board, as well as a small bag with a hexagon and two screws. Together with the device, the store sent me another small cardboard box labeled Dovpo TS Bottle Kit , where there was a spare bottle with a lid. As far as I understood from the description on the manufacturer’s website, it comes as standard, so check its availability on the site where you are going to purchase Dovpo Topside .

Spray Bottle TS Bottle Kit

The first thing to mention is the fairly decent size of the device, especially in height. So for those who are looking for a stealth set-up, Dovpo Topside is definitely not suitable, and it will be better to look after yourself for some kind of mechanical skonk. Because of the metal case, made of zinc and aluminum alloys, the mod in its “charged” state (with liquid and battery 21700) pulls under a decent 260 g. surprise comfortable and perfectly lying in the palm of your hand. The cover of the case in my case has a matte black rough surface and it looks like anodizing, pleasant to the touch and reminded Innokin devices. How strong it will be, to speak too early, the device I have only a week. I would like to call a separate personal advantage the absence of any inscriptions and logos on the visible parts of the device, there is only a “T” on the bottle, and that one is almost imperceptible.

Best Vape Mods, Vape Box Mod, Vape Devices | Ave40

Tops Squonk Mod colors from Dovpo and TVC

The color choice was quite good, initially there were six colors, and today the manufacturer offers the following range: black, red, silver, green, blue, black, gun metal, purple and gold. In all cases we are talking about painting the side walls of the mod, the frame of the case and some elements will be black.

New colors DOVPO Topside Squonk Mod

A little later, the manufacturer, together with Topside Dual Squonk Mod 200W, also released new colors for this mod, black with multi-colored spots: gold, red, gray and yellow-blue.

Topside Squonk Mod Features

  • Dimensions: 54 * 27 * 92 mm
  • Materials: zinc alloy / aluminum alloy / stainless steel (all parts that have contact with liquid are made of food grade stainless steel and silicone)
  • Supported batteries: 18650 (with adapter) / 20700/21700
  • Supported resistance: 0.08 – 3.5 ohm
  • Input voltage: 3.2 – 4.2 V
  • Output voltage: 1 – 8.5 V
  • Output power: 5 – 90 W
  • Bottle volume: 10 ml
  • Screen: 0.96 ″ OLED
  • Spring-loaded gold-plated 510 leak proof connector
  • Colors: Silver, Black, Gunmetal, Blue, Red, Purple, Gold, Green, Black Gold, Black Red, Black Gray, Black Blue.Connector and cover of refueling Topside Squonk Mod
  • Steel connector platform has a small diameter, only approx. 13mm and imperceptibly rises above the case, here the developers did everything “beautifully”: i.e. and there is practically no clearance under the atomizer, and the mod’s paint is not scratched. Plus pin promise gilded, which is important – spring-loaded, power reserve is good, there were no problems with any tested dripka. Between the minus part and the small Topsideinscription, a plastic insulator with a connector is clearly visible. As the manufacturer says, this part is perfectly protected from leakage, and for a fee you can not worry.

    dotRDA Single Coil (22 mm) on Topside Squonk Mod Littlefoot RDA (24 mm) on Topside Squonk Mod

    The only omission, and even purely visual, is the mismatch between the bend of the body and the circumference of the installed atomizer, the center of the connector is slightly shifted forward. But anyway, the stock is decent, drips and tanks up to 26 mm will not stick out.

    Battery Cover Topside Squonk Mod

    Designers took the soul on the battery cover, bringing here both the manufacturer’s and the blogger’s logos, and an unequivocal confirmation that all this is now Designed by the Vapor Chronicles , not forgetting the standard pictograms. There are also gas vents, the microscopic size of which, to be honest, raises questions about their effectiveness.

    Battery Cover Topside Squonk Mod 18650 Battery Adapter for Topside Squonk Mod

    The lid opens with a simple forward displacement, in the open state, there is a noticeable backlash in the loop, but on the whole the mechanism looks and seems to be quite reliable. A small “-” can be found near the contact area, indicating the polarity of the battery installation, and inside the battery compartment there is an adapter made of white plastic for 18650 batteries with the manufacturer’s logo. The internal contact is spring-loaded, it has a good power reserve and there were no problems either with the 21700 or the 20700: the lid is holding up perfectly, the bank is not walking inside. Near the battery compartment, you can see the bottom of the bottle.

    Topside Cover Squonk Mod Topside Cover Squonk Mod

    On the top of the mod next to the connector is the very thing for which Dovpo and released their device – a knurled round washer, it is also a cork of the bottle. The mechanism is rather curious: the cork plugs the bottle, and then it twists. We unscrew it counterclockwise, the spring-loaded mechanism is lifted, and we pull out the cap.

     

    Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40Topside cover and openings Topside Squonk Mod

    Under the lid, there are two large refueling holes hiding, which are covered with a silicone ring with protrusions. The size of the holes is such that it easily accommodates at least a dropper of a gorilla , even a glass pipette, even a spout from a twist-top bottle . I just would not advise pouring without aiming past the holes, the liquid can get on the connection of the bottle with the mod and on the thread where the cork is screwed. The mechanism is simple, but sealed and reliable, when refueling you do not need to disconnect anything, connect, pour from one bank to another, it is enough to unscrew the plug. It turns out no more difficult than filling the tank, brilliantly and simply. But at the same time, it remains possible to disconnect the container.

    Connection of a bottle with the Topside Squonk Mod mod Fluid Feed to Topside Squonk Mod

    Complete Topside Squonk Mod bottle with cap

    You may need to remove the bottle only if you decide to rinse it. Or just to see how the system of supplying fluid in the mod. To remove the jar, it is better to immediately unscrew the cap from the top, so it will be easier. Open the battery cover, pull the bottom of the bottle, and he is in our hands. The connection to the box occurs through the fitting and a small round hole in the cap; they are connected together when the bottle is installed. The connection is surprisingly reliable and, most importantly, dry; no fluid has appeared here after several refills of the device. I want to believe that everything will also remain in the future. The soft silicone container is in a hard plastic case and is closed on top with a steel lid screwed to the case with two screws. It is for these screws and need hex, lying in the box.

    Complete Topside Squonk Mod Bottle Silicone can and bottle body Topside Squonk Mod

    Silicone can, cap and dropper bottle Topside Squonk Mod

    The silicone cup, which acts as a fluid container, is made of a very soft material that is easily pressed by the fingers. If an ordinary jar were made of such silicone, it would surely “delight” you when installed in a mod with a constantly squeezing liquid. In a hard plastic case there is a window of the same shape and size as in the case of a skvonka. The size of the hole is large enough to easily press the jar with any finger, and due to the fact that the silicone container is quite deep in the case, it is also possible to exclude accidental pressing. The silicone tube for the fluid in my specimen has already been carefully trimmed, its better to immediately check.

    Click Here Ave40  For Vape Wholesale Cooperation.

    Now It’s Available: Dovpo Topside 90w Squonk Mod
    Hot Sale Recommendation:

    Vaporesso Aurora Play Zippo Pod Starter Kit

    Dovpo Topside Dual Squonk Box Mod

    Lost Vape Drone BF DNA250C Squonk Box Mod

    Voopoo Drag Nano Kit

    OUMIER Armadillo RDA

    Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

    WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

iJoy Mercury Starter Kit Review

Glory AIO called Orion, which was released by Lost Vape, does not give rest to many manufacturers. Therefore, they have adopted a similar form factor and now offer their own vision of this issue. In my memory, this is the fourth such project. 

IJOY Mercury kit 
IJOY Mercury kit - a familiar form factor ...
Dimensions: 78.4 x 40 x 20 mm 
Weight: unknown 
Case material: zinc alloy + stainless steel + resin 
Power: built 1100mAch 
cartridge Volume: 2ml 
evaporator Resistance: 1.0 / 1.2Ω 
Output Power: 12W 
Voltage Range: 3.15V 
mode: POWER 
Protection:low / high resistance, overheating, short circuit, overcharge / overdischarge 
Screen / diagonal: no 
Micro-USB port / charging: yes, charging current is unknown 
Color: see photo below 
IJOY Mercury kit - a familiar form factor ...
Package
contents – IJOY Mercury kit 
– replaceable evaporator 2pcs 1.0 / 1.2Ω (one preinstalled) 
– USB cable 
– user manual 
– warranty card 
IJOY Mercury kit - a familiar form factor ...
Our hero looks quite nice. This is a medium sized box with slightly cut corners for better ergonomics. From the decor only resin – here it is with a vengeance – and the panel is colorful, and the Drip type is echoed by its coloring.
IJOY Mercury kit - a familiar form factor ...
The complete tank has the following parameters – 16.8 x 55.2mm. It is fixed by a magnetic connector, but it is not the 510th. 

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40
IJOY Mercury kit - a familiar form factor ...
The tank will be refueled from above; it is enough to remove the drip type and uncork the silicone plug. Capacity, perhaps, standard. 
IJOY Mercury kit - a familiar form factor ...
Two types of replaceable evaporators are offered to accompany. Their resistance does not differ much, but the heating elements themselves are different. 
IJOY Mercury kit - a familiar form factor ...
Also, the developers provided for adjustment of the blower. 
IJOY Mercury kit - a familiar form factor ...
The main body hides in its womb an average capacity of built-in battery. Unfortunately, the charging current is unknown, the connector for this purpose was placed at the very bottom of the control panel. 

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40
IJOY Mercury kit - a familiar form factor ...
The control panel is made nicely – a large fire button, under it a “jackal” of LED indicators. By the way, at the very top lurked a lanyard.
IJOY Mercury kit - a familiar form factor ...
Naturally, holes are provided in the housing. The first is to control the level of liquid in the atomizer, the second is for air intake – this is where the above-mentioned evaporator adjustment ring is located. 
IJOY Mercury kit - a familiar form factor ...
Price $ 35.99

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: iJoy Mercury Starter Kit
Hot Sale Recommendation:

Geekvape Aegis Legend 200W with Alpha Tank

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

CoilART LUX 200 Kit Review

CoilART, not wanting to slow down, will present another novelty. We did not have time to cool off from their new “hot” mechanical mod, they set about to an adjustable segment. This time, they entered into a collaboration with fashion designer Aligheri Petraca, originally from Italy, who helped them in the design of this miracle. 

CoilART LUX 200 Kit 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
Dimensions: 89 x 53 x 25mm (only mod) 
Weight: unknown 
Case material: zinc alloy + glass 
Power supply: 2 x 18650 (probably) 
Chipset: Eagle chip 
Output power: 5 – 200W 
Operating mode: POWER, TC ( NI200, SS, TI) 
Temperature range: 200 – 600/95 ℃ – 315 ℃
Supported resistance: 0.05 – 3.0Ω
Protection: from low / high resistance, from overheating, from short circuit, from incorrect polarity, from overcharging / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: yes
Micro-USB port / charging: yes, charging current unknown
Color: see photo below

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
Package
contents – LUX 200 mod
– Lux Mesh Tank
– replaceable evaporators 2pcs (one is preinstalled)
– spare glass
– replacement oringas
– USB cable
– user manual
– warranty card

For some reason unknown to me, the developers, however, as always, were hurt with detailed information about their recruit, therefore I share with you that I dug. 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
On the complete non-service on the official website there is not a word. I have only dug up the fact that she has a capacity of 5.5 ml. I think it will not be so interesting to you, yet the main violin here is clearly played by the boxing mod. 

So, we have another brick in front of us. But this is not just a brick – remember more about the designer? So, apparently, it was he who proposed to decorate the side panels of this box with glass inserts. And on them also applied intricate prints. And what, it looks quite original and let it add a few dozen extra grams to the new product.

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
The color scheme turned out not the most extensive, but what. Then you and marbled finish – and in the light and dark variations, and even salad with red “landscapes or still lifes.” 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
The landing site was not shown to us, but I think it’s definitely not worthwhile to be flattered about the landing of large atoms. 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
The control panel looks knocked down and neat. The fire button is metallic and nicely square, the remaining control keys together form a button similar to the one described above. It is not known for certain color display or monochrome, but the fact that under it there is a connector for charging the battery can be seen with the naked eye))) 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
The battery compartment was not shown to us either. He is probably hiding under one of the removable side panels. 
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
Performance is decent, but the functional, unlike the price tag, is very modest.
CoilART LUX 200 Kit - high fashion hurries to the rescue ...
Price $ 76.49
CoilART LUX 200 Kit - high fashion hurries to the rescue ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: CoilART LUX 200 Kit

Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

SMOK Nord Pod System Kit

Vaporesso Luxe 220W TC Kit

Smok Micare Vape Pod Starter Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Vaporesso Aurora Play Pod System Kit-Review

For what I have always loved the company Vaporesso , so it is for the constant experiments in design. One of the most noticeable and specific products for me was the Aurora Kit , styled as a classic Zippo lighter . At the time of the release of the device, the AIO segment was not so strongly developed and the wow effect worked. Let’s see if the guys succeed in repeating success with Aurora Play .
Aurora Play by Vaporesso
As you can see, the overall concept remains the same. Designers again want to play on the recognition of these most Zippoand you have to admit – the result is good. The body was made less angular, and the similarity with the lighters is not so strong. At the same time, the thing looks stylish and blush for yourself the owner will not force. It is suitable not only as a device, but also as a stylish accessory.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Aurora Play by Vaporesso
Dimensions :

Height – 78.8 mm.
Width – 43.7 mm.
Thickness – 15.5 mm.
Aurora Play by Vaporesso
You can just twist in your hands, and you can play with the lid and hope that the mechanism’s resource will last for a long time: D
From myself, I would like to add that I like the novelty exactly until I imagine the experience of using it. Effectively throw back the lid, and then soar with the lid, which remains in the same position. I understand that something has to be sacrificed, but this is already too uncomfortable.

Vape Pen Starter kit, Wholesale AIO Vape Kit Vaporizer Kits – AVE40

Aurora Play by VaporessoAurora Play by Vaporesso
As it is easy to guess, the novelty is designed for use in the tight tightening mode and the possibilities end in meeting the basic needs of the vaper. Aurora Play works on the Omni Board Mini chip . The battery capacity is 650 mah, it charges in about 45 minutes with micro usb (1A). Depending on the cartridge used, the battery produces 10W or 18 to 20W. For on / off answers the side button located next to the indicator.
Aurora Play by VaporessoAurora Play by Vaporesso
The activation of the device itself takes place via a puff sensor. As already understood, the user chooses two options for cartridges – 1.3 ohm or 0.65 ohm. The manufacturer makes a distinction according to the type of liquid used – on salt or ordinary nicotine. The capacity of the tank is 2 ml. Judging by the description, the system of priming is considered a source of pride – Press-To-Fill.
Aurora Play by Vaporesso
Aurora Play by Vaporesso

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available :Vaporesso Aurora Play Zippo Pod Starter Kit

Hot Sale Recommendation:

SMOK Nord Pod System Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Freemax TWISTER Kit Review

The company released the Freemax Twister 80 W starter kit consists of a 80 watt Freemax Twister battery and a Fireluke 2 clear fuel tank.

 Freemax Twister has a built-in battery capacity of 2300 mAh with a maximum output power of 80 watts. Freemax Twister is equipped with an advanced chip that provides comprehensive protection and a response speed of 0.01 s.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Adjusting the power from zero to 80w is done using a rotary ring, which is located at the bottom of the ring.

Dimensions :  101.6 x 24.7mm (149.4 x 24.7mm kit completely) 
Material housing :  nerzhaveyuschayastal + plastic 
Power :  built 2300mAch  
chipset :  Twister chip 
output  power :  5 – 70 W 
range  voltage :  0.5 – 9.0V 
Power  current  peak :  30A 
Mode  of operation :  POWER 
Supported  resistance :  0.1 – 3.0Ω 
Protection : low / high-resistance, reheat, short-circuit, re-charge / over-discharge Connector 
type  :  steel 510, pin-sprung Screen diagonal :  no Micro-USB port charging :  yes

Pod System Vape Kit,Wholesale Pod systems Starter Kit – AVE40

The Twister 80W starter kit has six kinds of colors, so everyone will be able to choose their own set to taste.

 Equipment

– Twister mod 
– Fireluke 2 tank 
– replaceable evaporators 2pcs 0.15 / 0.2Ω (one preinstalled) 
– spare glass 
– spare origings 
– USB cable 
– user manual 
– warranty card 2pcs

 Fireluke 2 tank

Fireluke 2 Mesh Tank, has a diameter of 24 mm and a capacity of 5 ml. Tank production material stainless steel. It refuels from above – a cover movable.


Replaceable X1, X2 and X3 Mesh Coil evaporators, they are identical to Smok baby evaporators.

  •  Body Material: Stainless Steel
  • Atomizer type: неслужиживаемый
  • Evaporators: 0.15 / 0.2Ω
  • Capacity: 5ml
  • Diameter: 24mm
  • Height: 47.8mm with Drip type
  • Connector: 510, pin gold plated
  • Weight: 55g

Advantages and disadvantages

pros

  • Interesting design
  • Pleasant ergonomics
  • Ease of use
  • Evaporators on the grid
  • Price

Minuses

  •  The average volume of the tank.
  • Driptip
  • Unusual power adjustment washer

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Freemax Twister 80W Starter Kit
Hot Sale Recommendation:

Oumier Bulk RTA

Vaporesso Renova Zero Pod System Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Smok Nord Pod System Kit Review

The company SMOK has released a very interesting device for lovers of compactness and versatility.

The Nord pod-system received a large-capacity battery, refillable cartridges, replaceable evaporators for various types of puffs and a large tank capacity. Also, the manufacturer says that he has refined all known problems of previously released devices.

Nord allows you to use liquids of different densities and with different types of nicotine – both saline and regular free nicotine.

What is the result of this?

Overview pod-system SMOK Nord

Appearance

Externally, the pod-system looks quite massive for this type of device, this is due to the built-in high capacity battery 1100 mAh. Nord is about 4 times the size of the same Juul. Despite this, the device remains compact and convenient to use, dimensions are 94 x 30 x 18.8 mm, the weight in the collection is 80 grams.

Pod-system is available in 6 colors: black, red, gold, green, rainbow and black and white. Regardless of the color of the device, a honeycomb pattern is applied to the case.

Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40

Overview pod-system SMOK Nord. Appearance

The mouthpiece has a flattened profile, which makes the tightening process more convenient. At the junction of the cartridge with the battery pack there is a window for monitoring the level of the liquid. Below is the button to activate the device, which has a built-in battery discharge indicator.

The button is quite responsive, with a solid tactile response when pressed. All the edges of the device are rounded, making the Nord comfortably in your hand. Build quality is good, there is no backlash, rattles and other things.

Overview pod-system SMOK Nord. Appearance

Performance

The pod system is equipped with a very capacious battery and tank, it has the ability to use several types of evaporators and is capable of delivering up to 15 W of power.

All this allows the bathers to independently choose for themselves the best way to work, depending on the selected fluid density, nicotine content and its type. And also have a great autonomy both in charge of the battery and in refueling.

Battery

The capacity of the built-in Nord battery is 1100 mAh, which is quite a large figure for devices of this class. Depending on the evaporator resistance used and the frequency of “smoke breaks”, there will be enough capacity for 1-2 days of battery life.

Charging the device from the micro-USB cable with a maximum current of 1 A. Standard charging occurs at 5 V / 370 mA, fast charging technology is not supported. Full charge time less than two hours. At the end of the charge, the LED will stop flashing.

Despite the large capacity of the battery, there is no power change mode in Nord. The device relies on the set resistance of the evaporator and adjusts the output power automatically, limited to 15 watts.

The pod-system is activated using a button with a built-in battery discharge indicator.

To turn the device on or off, press the button 5 times, and to apply the voltage during the tightening process, press and hold. To find out the current color of the indicator, simply press the button twice.

Pod System Vape Kit,Wholesale Pod systems Starter Kit – AVE40

Overview pod-system SMOK Nord.Akkumulyator

Green indicator indicates a charge of more than 70%, orange – more than 30% and red – below 30%.

The device board supports a complete set of protections, such as protection against short circuits, overdischarge and overcharging, a cut-off of tightening for 8 seconds and others.

Cartridge

SMOK Nord uses refillable cartridges on replaceable evaporators, which is very unusual for pod systems. Inside the cartridge, in the area of ​​the mouthpiece, there is a cone-shaped opening, which prevents condensate from entering the mouth.

Cartridge capacity is 3 ml in the standard version and 2 ml in the European version. This volume lasts on average for 1-2 days of soaring, depending on the intensity of use of the device.

Review of the pod-system SMOK Nord.Cartridge

Out of the box there are 2 types of evaporators available – Nord Mesh 0.6 Ohm with a spiral in the form of a grid for saber floating and Nord Regular 1.4 Ohm for fans of traditional MTL puffs.

In addition, Nord Ceramic 1.4 Ohm ceramic evaporators are on sale, which are also designed for cigarette traction, but better convey the taste.

Low resistance grid evaporators are suitable for thick liquids with a PG / VG 30/70 content and low nicotine content. 1.4 ohm MTL evaporators are suitable for saline liquids with PG / VG 40/60 or 50/50 and high nicotine content.

This gives bathers more freedom of choice when it comes to choosing the flavors and strength of the liquid.

Review of the pod-system SMOK Nord.Cartridge
Review of the pod-system SMOK Nord.Cartridge

As for the taste transfer, the evaporators noticeably better taste than conventional cartridges of most pod-systems. Evaporators on the grid, of course, cope with this task better, but at the same time consume more power and significantly reduce the autonomy of the device.

There are several silicone seals on the evaporators to prevent fluid leakage during refueling and use.

Installation is quite simple – you just need to insert the evaporator into the cartridge, once in the slots.

To refill, you need to remove the cartridge from the battery pack, open the silicone plug on the side and fill the fluid. Close the silicone plug and let the cartridge stand for 2-3 minutes so that the evaporator is soaked.

Review of the pod-system SMOK Nord.Cartridge

Options

  • Size: 94 x 30 x 18.8 mm;
  • Weight: 80 g (battery pack 65.5 g, cartridge 14.5 g);
  • Tank capacity: 3 ml.

Specifications

  • Battery Capacity: 1100 mAh;
  • Maximum power: 15 W;
  • Operating voltage: 3.3 – 4.2 V;
  • Charging parameters: 370 mA / 5 V;
  • Maximum charging current: 1 A;
  • Button activation;
  • Evaporator support: MTL 1.4 Ohm / Sub-Ohm 0.6 Ohm.

Equipment

The pod-system SMOK Nord comes in this kit:

  • Itself pod-system SMOK Nord;
  • Replaceable evaporator on the grid for Nord Mesh 0.6 Ohm;
  • Replacement Evaporator for MTL Nord Regular 1.4 Ohm;
  • Micro USB cable;
  • Manual;
  • Branded packaging.
Overview pod-system SMOK Nord.Complete

A unique feature of this device is a new technology of protection against fakes. SMOK now uses a holographic label that is almost impossible to copy. Tilting the box slightly, you can see two letters “S” that rotate around the center.

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: SMOK Nord Pod System Kit 
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

SMOK Mico Resin AIO Pod Kit Review

The SMOK Mico is a tiny vape pod mod with a built-in 700mAh battery. The kit includes two SMOK Mico pods for vaping different types of juices. They both hold 1.7mL of e-liquid and have different coils. One is an MTL 1.0ohm cartridge, and the other is a sub-ohm, DL, 0.8ohm pod. What truly sets the Smok Mico apart though from the rest of the competition is its build quality. Most manufacturers, in their efforts to keep costs and overall weight low, opt for plastic materials for the main chassis of their devices.

SMOK Mico Resin AIO Pod Kit 700mAh

A palm-sized predator, the SMOK Mico packs a powerful vapor punch into a pocket-sized mod.

The refillable pod system has a 700mAh battery and some devilishly brilliant coils.

We love the 0.8ohm mesh coil because it kicks some serious flavor and you can use it with any kind of juice, including high VG and low nicotine e-liquids. But if high nicotine and discrete vaping are your thing then the 1.0 ohm coil is a great partner for those nic salts.

Focus On www.ave40.com For More Vape Devices.

Smok is having none of that though, evidenced by the Smok Mico and its rigid and premium feeling zinc alloy body giving the device a surprising amount of heft despite its compact and small form factor design.Size-wise, the square-shaped mod will fit easily in the palm of your hand and slip in the front pocket of your skinniest jeans. It also comes with a lanyard, so you can hang it round your neck where it’s always ready for action.

Parameters:

Material: Zinc alloy

Size: 56.3*46.5*14.8mm

Weight: 65g

Battery Capacity: 700mAh

Output Power: 10-26W

Input Voltage: 3.3V-4.2V

Output Voltage: 3.0V-4.0V

Standby Current: <20uA (No load)/<100uA (Load)

Charger Output: DC 5V 0.5A

Charging Voltage: 5V

Charging Current: 0.37A (MAX)

Resistance Range: 0.6Ω-2.0Ω

E-liquid Capacity: 1.7ml

SMOK Mico Resin AIO Pod Kit 700mAh

Square shape with resin panel
Mesh coil and regular coil for different juices
Perfect MTL vape with Mico
A lanyard included for easy carrying

Focus On www.ave40.com For More Vape Kits.

Package Included

Standard Edition

1 x MICO Device

1 x MICO Pod (0.8Ω mesh coil) (1.7ml) (No e-liquid)

1 x MICO Pod (1.0Ω regular coil) (1.7ml) (No e-liquid)

1 x Lanyard

1 x USB Cable

1 x User Manual

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: SMOK Mico Pod Kit

Hot Sale Recommendation:

Vsticking Viy Pod Vape System Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Smok Trinity Alpha Starter Kit