Wotofo SERPENT SMM RTA is on sale at Urvapin!

Designed by Suck My Mod and WOTOFO, the unique rebuildable tank atomizer Wotofo SERPENT SMM RTA features a unique single coil build deck which is designed to support both forward (leads wrapped over) and reverse (leads wrapped under) coil building.Now Wotofo SERPENT SMM RTA is on sale with comparative price at urvapin. The following are some details.

This rebuildable atomizer tank features a beautiful stainless steel construction with a heat resistant ULTEM wide bore drip tip. ULTEM is a high temperature plastic with a higher melting point significantly compared to Delrin.

Despite its low profile and compact design, the Wotofo SERPENT SMM RTA has 4ml tank capacity which is conveniently refillable through its threaded top fill design. The build deck features a 2 post block design with a total of four terminals to accommodate forward and reverse built coil configurations. The design of the Wotofo SERPENT SMM RTA truly brings out the flavor of your favorite e-Liquid.

Wotofo SERPENT SMM RTAParameters:
510 Threaded
24mm in diameter
4.0ml juice Capacity
Stainless Steel Construction
ULTEM Wide Bore Drip Tip

Wotofo SERPENT SMM RTA Features:
Designed In Collaboration with Suck My Mod
Top Fill Design with Twist Off Cap
Unique Dual Wall Build Decks with Four Holes Post
Allows for Forward and Reverse Coil Builds
Designed for Single Coil Configurations
Large Holes Wick
Deep Juice Well
Direct Airflow to Coil Design
Dual Airflow Slots
Adjustable Airflow Control Ring

Package includes:
1 * Serpent SMM RTA
1 * Screw driver
1 * User Manual
1 * Bag Japanese cotton
1 * Bag spare screws and orings
1 * Bag Spare coils

More details of Wotofo SERPENT SMM RTA please have a look at urvapin.

Best Seller:

CoilART AZEROTH RTA Experience Evaluation

Structure of wire electrode column affects the electronic cigarette players’ experience. The structure of the electrode column base affects the air inlet. The combination of the two determines the players most experience.

The AZEROTH RTA atomizer, just on the electrode column and base structure, make innovative changes. Triple and double coil replaceable deck, cooperate with the inlet on the bottom, the taste of this atomizer experience and playability is certainly not too bad.

CoilART”s square carton packaging still contracted style. On the positive side it is printed with brand LOGO, name and appearance of atomizer.It’s the contents list on the back (atomizer, double coil deck, insulation roof, spare glass storehouse, accessories package , ring, T screwdriver , cue CARDS) and anti-counterfeiting query stickers.

Thick stainless steel drip nozzle is connected to the stainless steel oil ring. Around the oil ring there are a total of 12 arc grooves, increasing the friction and also coincide with the vertical groove on inlet adjustment ring. Through oil storehouse you can see CoilARTLOGO on central atomization warehouse.

At the bottom of there are three air inlet, and between the two inlet bulge vertical open three curved groove, which I ncrease the visual effect and enhancefriction.

The stainless steel lid drops use integral design. The one-piece drop inside the mouth is taper, which can effectively prevent condensate deposits. Atomization storehouse and oil ring are together, and the oil ring top engraved with grooves, built-in o-ring seal. Inner sag of the oil ring reduce spill by excessive oil. The atomizer is equipped with double and triple coil deck. All use plating processing. The modeling of triple coil deck is unique.

At the bottom, the inlet have done very well, we can through the electrode base see the intake adopt balance processing, which can make the airflow into atomization warehouse more uniform, and improve taste.


  1. Plenty of 4.5 ML of oil reserves
  2. Triple coil deck brings rich taste
  3. Triple / double coil deck. Playability and suitability of smoke/taste are very high


  1. Triple coil deck, do have difficulty on silk, especially for novice players
  2. The metal lid are together with drops of mouth, it will be a very hot
  3. Hexagon screws of triple coil deck and cross screws of double coil deck are easy to slide tooth





Smok Q-BOX 50W Box mod Starter Kit Review

Recently it seems that smoktech released the newest mini box starter kit Q-BOX,so today let’s check this mini vape kit. This mini vape kit have five fashionable colors available, with compact and mini size. It is so easy to carry and friendly-pocket.

Package of Q-BOX mod:
1*Qbox mod
1*TFV8 baby tank(3.0ml)(EU version:2.0ml)
1*V8 baby M2 dual core(pre-installed)
1*V8 baby M2 0.25ohm dual core
1*USB cable
1*User manual
1*Spare parts

Features of Q-BOX mod:
Material:zinc alloy
Colors:black, silver, purple, gold, rainbow
Battery capacity:1600mAh
Output range:1-50W
Working voltage:0.1-9.0V
Standby current:<500uA
Resistance range:0.1-3.0ohm(VW mode)/0.06-3.0ohm(TC mode)
Temp control range:200-600F/100-315 C
0.96″ OLED screen
Multiple protections
Intelligent atomizer recognition
Puff monitoring system
12 seconds cut-off
Short circuit protection
Over-heating protection
Low-battery warning

Features of TFV8 baby tank:
Material:stainless steel + pyrex glass
Size:53*22mm(EU version:50*22mm)
Capacity:3.0ml(EU version:2.0ml)
Re-designed bottom pair air slots
Top refill system
RBA deck supported

The Q-box kit include Q-BOX mod and baby tfv8 tank, max output 50 watts, built-in 1600 mah battery. It support resistance as low as 0.06 ohm, TC and VW output modes switchable. The smok Q-BOX mod built-in 0.96 inch OLED screen. This clear and bright screen will show you the vaping data, muiltple functions to keep vape safe.

The tfv8 baby tank can hold 3ml e juice. EU version only can hold 2ml e juice, comes with v8 baby-m2 coil heads, re-designed bottom pair air slots, top refill sysem and support RBA deck.

This mini size and fashionable vape kit smok Q-BOX will let vapers can put it in pocket easily. The mini size and powerful cloud beast tank will produce deep taste flavor and massive clouds. So vapers can enjoy vaping everywhere. How convenient it is. I know you would like to have one.





Limitless 200w LMC TC Box Mod New Colors $55.69 Vape Deals

Limitless LMC 200W Box Mod

Temperature Control Box Mod

For a limited time only, the Limitless LMC 200w TC Box Mod New Version is on sale right here for only $55.69 from Urvapin! No coupon code required! Free shipping is included with this purchase! The colors available are new version Red, Flag, Rainbow, Space Gray and Grain.

The Limitless LMC 200W TC Box Mod is powered by two 18650 batteries (not included). This device does feature a maximum wattage output of 200w, and features a custom chip! The Limitless LMC 200w TC Box Mod also features temperature control for Ni200, Ti, and SS wires.

The Limitless LMC 200w TC Box Mod has a ton of safety features built in, providing the user a peace of mind during use. The Limitless LMC 200w TC Box Mod includes three memory modes as well as three presets: Soft, Standard, and Powerful. Lastly, the Limitless LMC 200w TC Box Mod features interchangeable plates with magnets, so you can easily customize this device!

All in all, this is a great deal for the Limitless LMC 200w TC Box Mod! If you are a fan of Limitless and looking to pick up a new temperature control box mod for cheap, then this is a deal you cannot miss! Make sure to check out this deal at Urvapin for only $55.69! This sale does end 6/23/17!

Order here:


Product Features:

  • Required 2 18650 batteries (not included)
  • Maximum wattage output: 200w
  • Minimum Firing Resistance: 0.08 ohm
  • Many Safety Features
  • Temperature Control: Ni200, Ti, SS
  • Interchangeable Plates with Magnets
  • 3 Preset Modes (Soft, Standard, Powerful)
  • New Version
  • Custom Chipset

Order here:



Introduce you a new 22mm dripper tank – Oumier Wasp Nano RDA, which comes with a short profile and solid built body. Featuring a large dual post deck, it’s specially designed for single coil build. The adjustable side air slots are located at the same level with the coil, delivering smooth and dense vapor clouds. The amazing thing is this Wasp Nano RDA adopts an exchangeable squonkable bottom pin design, which allows you to use it with your squonk mod. You can use it with your Squonk style MOD. Gold and Silver colors are available. The top cap is made of PEI, an environment-friendly material, ensuring you a safe and cool vaping.

Size: 22.5mm x 22mm
Thread: 510

It omes with: Wasp Nano RDA, spare o-rings and screws, squonk pin, cardboard-esque cotton. Just two pieces. I love how simple it is.

The quality of the machining is great. The threading for the screws is smooth, and the gold-plating has remained perfect after multiple washings. It is compatible with most 510 thread batteries/MODs. Rebuildables are for experts, not for average or beginner vapers with no knowledge of how to rebuild atomizers. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronic cigarettes.

The machining is great, the flavor is stellar, and it looks pretty nice also.

The only things you may don’t love about it is the allen screws and the tiny juice well. After the building process the screws aren’t much of a con, but the tiny juice well means constant re-dripping. It’s not ridiculously small, but after getting used to 24MM RDAs, the well feels pretty tiny.

If you are look for it, you can select it on urvapin.


Limitless Pulse Pod System

The Limitless Pulse System, by Limitless Mod Co and Ply Rock, is a new, draw-activated, closed system pod mod with a difference – its pods are refillable. Like its older cousin the MyJet by MyVapors, this is a pod-based system which offers the user total control in what e-liquid they vape. The Pulse starter kit ships with the mod itself and two unfilled pods, retailing for $29.95, and a pack of three refillable pods sells for $11.49. The Pulse’s battery comes out at roughly 380 mAh, with a fixed 8 W output. The pods are 1 mL in capacity (although specs elsewhere state 1.5 – 2 mL). The inbuilt coils put out between 1.7 – 1.8 ohms and use silica as wicking material. The Pulse has a striking, futuristic look – LED accents running along the device light up on inhalation. The triangular button up front turns the device on and off, and toggles between the 7 color choices. Don’t judge a book only by its cover, however. Let’s take a closer look and vape on the Pulse.

For a pod mod, the limitless Pulse comes in lavish packaging. First impressions are great and the device looks futuristic with its dynamic accenting. The pods seem robust and the plastic mouthpiece pops off easily with a bit of prying. The Pulse is draw-activated, but can be turned on and off with five clicks of the button that also controls the LED accents.

One of the first things I notice is the beveled edge of the base of the device. This is one pod mod that is not intended to stand upright, and the sharp angle of this edge serves no purpose except to light up and look cool.

The pods click into the Pulse device easily enough, although the angular profile of the top of the Pulse makes it less plug-and-play and more push-and-jiggle than I’d like. I’ve seen conflicting specs for the Pulse from different sources so filled up one pod with a syringe of e-liquid. To my surprise, the pod only has a capacity of 1 mL. This is the smallest capacity of any pod mod system I’ve seen, apart from the Juul.

The coil and wick are located at the base of the pod. The coils use silica as the wicking material. By prying the positive and negative pinsout of the pod housing, I was able to get an ohm reading on a metering tab. It came out around 1.7 – 1.8 ohm. According to Limitless Mod Co’s blog the pods can be refilled 8 to 12 times before they need to be replaced.

Refilling the pods is simple. Remove the black mouthpiece with a little pressure and you will see a red rubber plug. This covers two holes on either side of the airflow chimney. A red arrow on the pod body indicates that only one hole should be used for refilling.

You will need a unicorn bottle or syringe to refill. I measured a capacity of 1 mL based on the syringe I used. Even for a pod mod, that’s small. But with an output of 8 W, you aren’t going to be burning through the e-liquid anyway.

The base containing the coil and wick can be easily pried away from the pod housing using a pair of elbow tweezers. I counted 9 wraps on the coil with an inner diameter of 1.5 mm. If you need to dry burn the coil, one option is to unfold and remove the gold connection pins from the pod housing. Connect the pins to the positive and negative posts of an RDA and screw this onto a metering tab.